TI INA333 ECG心电图应用方案

        TI公司的INA333是微功耗零漂移轨到轨精密仪表放大器,采用单一外接电阻可把增益设定在1到1000之间.工作电压低到1.8V(±0.9V),静态电流仅为50uA,有极低的噪音密度(50nV/ Hz)  .
     

        广泛用于桥式放大器,心电图(ECG)放大器,压力传感器,医疗仪器和手提仪表,热电偶放大器和数据采集.本文介绍了INA333的主要性能, 方框图, 基本的连接电路,以及ECG心电图系统方框图,非常低功耗的ECG应用电路和血糖仪应用电路以及数据采集系统电路图.

      INA333 Micro-Power (50uA), Zerø-Drift, Rail-to-Rail Out Instrumentation Amplifier

       The INA333 is a low-power, precision instrumentation amplifier offering excellent accuracy. The versatile 3-op amp design, small size, and low power make it ideal for a wide range of portable applications.

      A single external resistor sets any gain from 1 to 1000. The INA333 is designed to use an industry-standard gain equation: G = 1 + (100k /RG).

       The INA333 provides very low offset voltage (25µV, G ≥ 100), excellent offset voltage drift (0.1µV/°C, G ≥ 100), and high common-mode rejection (100dB at G ≥ 100). It operates with power supplies as low as 1.8V (±0.9V), and quiescent current is only 50µA—ideal for battery-operated systems. Using autocalibration techniques to ensure excellent precision over the extended industrial temperature range, the INA333 also offers exceptionally low noise density (50nV/ Hz) that extends down to dc.
The INA333 is available in both MSOP-8 and DFN-8 surface-mount packages and is specified over the TA = -40°C to +125°C temperature range.

       主要特性:
      LOW OFFSET VOLTAGE: 25µV (max), G=100 
       LOW DRIFT: 0.1µV/°C, G=100 
       LOW NOISE: 50nV/ Hz, G=100 
       HIGH CMRR: 100dB (min), G=10 
       LOW INPUT BIAS CURRENT: 200pA (max) 
       SUPPLY RANGE: +1.8V to +5.5V 
       INPUT VOLTAGE: (V-) +0.1V to (V+) -0.1V 
       OUTPUT RANGE: (V-) +0.05V to (V+) -0.05V 
       LOW QUIESCENT CURRENT: 50µA 
       OPERATING TEMPERATURE: -40°C to +125°C 
       RFI FILTERED INPUTS 
       MSOP-8 AND DFN-8 PACKAGES 

       应用: 
       BRIDGE AMPLIFIERS 
       ECG AMPLIFIERS 
       PRESSURE SENSORS 
       MEDICAL INSTRUMENTATION 
       PORTABLE INSTRUMENTATION 
       WEIGH SCALES 
       THERMOCOUPLE AMPLIFIERS 
       RTD SENSOR AMPLIFIERS 
       DATA ACQUISITION

图1. INA333方框图



图2. INA333基本连接电路




图3.ECG心电图系统方框图




图4.带右腿驱动的ECG放大框图




图5.单电源非常低功耗的ECG应用电路



图6.用于以电池为能源的手持设备的低功耗对数功能的应用电路(血糖仪案例)



图7.用于PT100 RTD的四线3V调理电路(带可编程增益采集系统)

     点击查看全文

本文来源：TI公司    作者：

隐藏原文↑