您的位置：嵌入式在线 > 解决方案 > 工业控制 > ishnatek Fusion马达控制解决方案

ishnatek Fusion马达控制解决方案

2008-04-29 嵌入式在线收藏 | 打印

ishnatek 公司的AFS600是采用Actel Fusion FPGA的马达控制子板,能和Fusion入门开发套件联合使用.

       它采用Fusion的丰富的I/O特性和灵活性,能在单个平台上驱动多个马达,它的PLL和时钟发生器能用于多种马达频率,内部的阈值用来控制和保护马达驱动,而实时计数器用作记录应用情况,而非易式性存储器则用来存储重要的可配置数据, Fusion内的ADC用来进行模拟控制.本文介绍了马达控制子板的主要性能,方框图以及详细的电路图.

      The Motor Control Daughter board is designed to work along side the Fusion Starter Kit. The board makes use of Fusion’s rich I/O features and flexibility to drive multiple motors on single platform. Fusion’s on-board PLL and clock generators target a wide range of motor frequencies. Internal threshold flags are used to control and protect the motor drive. Internal Real Time Counter can be used for logging applications and on-board nonvolatile memory to store important configuration data. Analog control is provided using internal ADC on Fusion.

     主要特性:
     Supports
     BLDC – HALL sensor and sensorless BEMF
     Stepper Motor - Full / Half / Micro-stepping
     Brushed Motor
     Start / Stop / Step / RPM+ / RPM- / DIR Controls
     Multiple pulse width modulation (PWM) Modes – high side, low side,      both sides and complementary
     4 PWM Frequencies and 4 Acceleration Settings
     Over-Current/Over-Temperature Protection
     Software / Hardware Control

     方框图:
     The average phase voltage is modulated using a PWM core to control the speed of the motor. A dedicated finite state machine is designed to commutate the motor both in Sensored and Sensorless modes. There are hardware controls provided through switches. An RS-232 serial interface engine is provided on-board and externally interfaces with the USB port through software.